High and low temperature test cases are usually placed in the laboratory for testing the high and low temperature resistance of products.With the development of various industries, the performance of products is also increasingly strict.This has led to the application of high and low temperature test cases, from the initial machinery industry, research institutions have gradually extended to more fields.Nowadays, many users have placed high and low temperature test cases in office buildings, so there is a problem.Can the elevator of the office building, the door equipment of the office enter?
It's hard to get into an office.In order to meet the requirements of customers.High and low temperature test box manufacturer can be made into the split type.1. Put the test box controller on the top, and the left and right width can be reduced by about 20cm.2. Separate the test room from the refrigeration system, and the height can reduce the total height of the equipment by half.
Therefore, when selecting the high and low temperature test box, the user should consider not only the test, but also the location of the test box.If the door size, elevator size is not enough, whether to open doors and Windows, whether to use hoisting.If not, then according to the test, the size of the door should be selected to fit the volume of the test box to make it into the left and right or the upper and lower split high and low temperature test box.All these require detailed communication and confirmation between users and manufacturers.